Αποτελέσματα Αναζήτησης
A PPPoE service name table can include three types of service entries: named services, an empty service, and an any service. For each service entry, you specify the action to be taken by the underlying interface when the router receives a PADI packet containing the specified service name tag.
- Example: Configuring a PPPoE Service Name Table
This example shows how you can configure a PPPoE service...
- Configuring PPPoE Service Name Tables | Junos OS - Juniper Networks
To configure PPPoE service name tables: Create a PPPoE...
- Example: Configuring a PPPoE Service Name Table
6 Απρ 2021 · Solution. Usually service name configuration on PPPOE interface option is not available from GUI. It is necessary to configure service name from CLI. Use following commands: # config system interface. edit port3. set mode pppoe. set username fortinet. set password fortinet123.
This example shows how you can configure a PPPoE service name table on an MX Series router with service entries that correspond to different client services.
1 ημέρα πριν · Go to Network and Sharing Center. Click on “Set up a new connection or network”. Select “Connect to the internet”. Choose “Broadband (PPPoE)”. Enter the Service Name, AC Name, username, and password provided by your ISP. Configure the MTU, MRU, and authentication protocol as required. Click “Connect” to establish the PPPoE ...
The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating Point-to-Point Protocol (PPP) frames inside Ethernet frames. It appeared in 1999, in the context of the boom of DSL as the solution for tunneling packets over the DSL connection to the ISP 's IP network, and from there to the rest of the Internet.
5 Νοε 2022 · PPPoE Service Names. Each PPPoE service has a service name, which can be defined as a set of characteristics that are applied to a PPPoE connection when that service name is selected during call setup.
To configure PPPoE service name tables: Create a PPPoE service name table. See Creating a Service Name Table. (Optional) Configure the action taken for the empty service. See Configuring the Action Taken When the Client Request Includes an Empty Service Name Tag.
