Αποτελέσματα Αναζήτησης
22 Αυγ 2020 · You have interconnected the devices and configured the interfaces and have connectivity within the local LANs. Your job is to complete the OSPF configuration according to the requirements left by the engineer. Use the information provided and the list of requirements to configure the test network.
14 Φεβ 2020 · Part 1: Configure VLANs; Part 2: Assign Ports to VLANs; Part 3: Configure Static Trunking; Part 4: Configure Dynamic Trunking; Background. You are working in a company that is getting ready to deploy a set of new 2960 switches in a branch office. You are working in the lab to test out the VLAN and trunking configurations that are planned.
29 Σεπ 2020 · Part 1: Build the Network and Configure Basic Device Settings. Part 2: Create VLANs and Assign Switch Ports. Part 3: Configure an 802.1Q Trunk between the Switches. Background / Scenario. Modern switches use virtual local-area networks (VLANs) to improve network performance by separating large Layer 2 broadcast domains into smaller ones.
9 Μαΐ 2020 · 3.6.1 Packet Tracer - Implement VLANs and TrunkingCCNAv7: Switching, Routing, and Wireless EssentialsVisit our Website to contact us: http://www.techacadhelp...
22 Σεπ 2023 · Objectives: Part 1: Configure VLANs Part 2: Assign Ports to VLANs Part 3: Configure Static Trunking Part 4: Configure Dynamic Trunking Background: You are working in a company that is...
In this Packet Tracer Physical Mode (PTPM) activity, you will create VLANs on both switches in the topology, assign VLANs to switch access ports, and verify that VLANs are working as expected.
12 Φεβ 2021 · This video walks through completing Packet Tracer 3.6.1 - Implement VLANs and Trunking. This is part of the Switching, Routing, and Wireless Essentials versi...
