Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

1. enpinfo.hikvision.com › unzip › 20200325153109_74959_docActivation and Login - Hikvision

   enpinfo.hikvision.com › unzip › 20200325153109_74959_doc

   • Αποθηκευμένο αντίγραφο

   Login. Enter the User Name and Password, and click Log In. Optional: Change the network configuration. Go to System Management > Network Configuration. Figure 3. Network Configuration. Change the IP address, mask address, the gateway address, DNS and alternative DNS as needed. You can log in to the switch with the new IP address next time.

   • Device Management

     After logging in to the Web, you can go to Device Status to...

   • Access Camera via Web Browser

     Open the web browser. Input IP address of the camera to...

2. enpinfo.hikvision.com › unzip › 20200529170651_25030_docActivate Camera via Web Browser - Hikvision

   enpinfo.hikvision.com › unzip › 20200529170651_25030_doc

   • Αποθηκευμένο αντίγραφο

   For the camera with the DHCP enabled by default, use SADP software or PC client to activate the camera. Make sure your camera and your PC connect to the same LAN. Change the IP address of your PC to the same subnet as the camera. The default IP address of the camera is 192.168.1.64.

3. enpinfo.hikvision.com › unzip › 20200529170651_25030_docAccess Camera via Web Browser - Hikvision

   enpinfo.hikvision.com › unzip › 20200529170651_25030_doc

   • Αποθηκευμένο αντίγραφο

   Open the web browser. Input IP address of the camera to enter the login interface. Input user name and password. Note: Illegal login lock is activated by default. If admin user performs seven failed password attempts (five attempts for user/operator), the IP address is blocked for 30 minutes.

4. www.hik-connect.comUser Authentication Center - Hik-Connect

   www.hik-connect.com

   User Authentication Center. This platform has been designed to help customers effectively operate and manage security devices, including network cameras, NVRs, DVRs, security control panels, access control devices.

5. supportusa.hikvision.com › support › solutionsHow to log-in to Hik-connect on iVMS-4200 : Hikvision Portal

   supportusa.hikvision.com › support › solutions

   • Αποθηκευμένο αντίγραφο

   13 Ιαν 2023 · -Then log-in with the Hik-connect username and password. (see 2nd snip below) -To verify that the devices are added to the iVMS-4200 via Hik-connect, check the Connection Type column and verify that it says Cloud P2P and has an Online status.

6. www.hikvision.com › content › damSwitch Web - Hikvision

   www.hikvision.com › content › dam

   25 Ιουλ 2022 · 1. Enter the default IP 192.168.1.64 in the browser address bar. Figure 2-1 Activation Note You are recommended to use the newest version of the following browsers: IE 10+, Edge, and Chrome 31+. 2. Configure the password and confirm it. 3. Click OK. Go to the login page. Switch Web User Manual 2

7. www.videoexpertsgroup.com › glossary › hikvision-default-ip-username-password-portHikvision default IP, Username, Password, Port - Video Experts...

   www.videoexpertsgroup.com › glossary › hikvision-default-ip-username-password-port

   • Αποθηκευμένο αντίγραφο

   26 Ιουν 2024 · In summary, when configuring a Hikvision camera for the first time, you will need the following default settings: Default IP: 192.168.1.64; Default Username: admin; Default Password: (create upon initial setup) Default Port: 80; These settings are crucial for accessing and managing your Hikvision camera effectively.