Αποτελέσματα Αναζήτησης
Ensure the DISH Network remote control is working with the receiver (see page 4 or 5). Place both the DISH Network remote and the original device’s remote control on a flat, stable...
- dish 20.0 & 20.1 Remote Control Manual | ManualsLib
Turn your DISH receiver– or another device you are...
- dish 20.0 & 20.1 Remote Control Manual | ManualsLib
Pair Your Remote. Press and hold the device button you want to program until all four device buttons light up. Press and hold ∙ TV to pair with your TV ∙ DVD or AUX to pair with any other device. Enter the three-digit code for your device while the device buttons are lit up. See Device Codes in this guide. Press #.
Turn your DISH receiver– or another device you are controlling–on or off. Device Buttons. Change the device you want to control: SAT (your DISH receiver), TV, Blu-ray/DVD player, or auxiliary device. Input. Change your TV's input when in TV mode. Menu.
View and download Dish remote 20.1 manuals for free. Remote Control 20.1 and 21.1 instructions manual.
The 20.1 remote does not require any configuration. Go to Insert the Batteries (page 2). Configuring the 21.1 Remote. Complete the following steps to configure your remote. Pull the remote battery cover off. Decide whether to use IR or UHF signals for the remote.
Programming Remote to Control Second Receiver in AUX Mode If you have another DISH receiver installed, you can use this remote control in AUX mode to operate your new receiver. AUX mode uses only IR signals, so the line of sight to the second receiver must be unobstructed.
Complete the following steps if you are using the 21.0 remote with TV2. Pull the remote battery cover off. If the blue 2 key is not showing on the remote, separate the key from the remote by inserting your thumbnail or a coin in the crease. Remove the key by grasping at the bottom.
