Αποτελέσματα Αναζήτησης
28 Ιουν 2023 · Hello, I'm new to this forum and a new Axis owner, and I've researched for about a day to find a write-up on a good piggyback setup with y-directional values. any input is greatly appreciated. Jump to content
The WakeMAKERS FIT Series ballast bags included in your upgrade kit has been specially tailored to have a proper fit in your rear lockers. A correct fitting bag shape ensures maximized capacity, easy integration, and better results for your wake.
14 Ιουλ 2021 · It doesn’t look like it has the bow plug n play installed. It has the 2 750’s in the stern though. I looked under the cushions. Near the center and bow of the boat but only found a larger line that went underneath the helm. Is this common? Do people only set up rear plug n play and not the front?
So I finally bit the bullet and purchased the Axis specific Hi-FLO front and rear ballast upgrades from Wakemakers for my 2013 Axis A22. I went to install them and looked like this
Our Axis A22 Rear Ballast Upgrades is the complete solution to adding rear ballast to your Axis A22. The Axis rear Plug N Play ballast upgrade is designed to be controlled using the rear ballast switch on your dash.
10 Απρ 2011 · The Axis Wake Plug N' Play Bow Ballast Bag upgrade is easy to install and makes a huge difference to the wake for both wakeboarding and wakesurfing. Installing the Axis Bow bag will at the most take 15 minutes and does not require a trip to the dealership.
29 Οκτ 2020 · First locate your ballast pumps. On my Mastercraft X10 they are at the mounted on the transom in front of the engine. There are also 3 in my boat. One was mounted upside down and had to be removed to get to the impeller. This boat also has factory ballast. Here is the new impeller. It came with the impeller, lube, and an O-ring.
