Αποτελέσματα Αναζήτησης
SHIMANO gear change support mechanism utilizes some portion of pedaling force at down shifting. The result is a quick and precise downshift with very light feeling.
1. Build hub into complete wheel set. 2. Fit the dust-cup (2)、spacer (3)、sprocket (4)、circlip (5) onto the driver. For hubs already pre-fitted with a plastic dust-cap with built-in spacer, simply fit sprocket (4) and circlip (5) onto the hub driver. 3. Put the hub axle into the rear fork end and place the chain around the sprocket (4). 4.
5 Νοε 2013 · Step 1: Build your wheel. We chose the 36 hole version of the hub and laced it 3-cross for a very strong rear wheel that will handle loaded panniers and city streets nicely. Step 2: Assemble the bits. The hub comes without the dust cover, sprocket and cable stop bracket installed.
1. Build the hub into wheel. 2. Assemble the sprocket (3) and circlip (2). 2 3 3. Fit fulcrum lever set (4) on the hub. 4. Check the position of the protrusions of the shift actuator. They should align with the guide hole of cable pulley when the fulcrum lever set is fitted on the axle. 5.
View and Download Sturmey-Archer AB3 instructions online. 3-speed Internal Gear Hubs. AB3 bicycle accessories pdf manual download. Also for: Sab3, X-rd3, Xl-rd3, Aw, S-rf3, Awc, Awcii, S-rc3, S-rc3ii, Awb, S-rb3.
Technical Information - S-RF3 Three Speed Hub Part 1 GENERAL INFORMATION 1.1 Scope of this leaflet This leaflet refers to the Sturmey-Archer SRF3 Three Speed Hub Gear, and associated controls, cables and fittings. The hub model can be identified from the markings on the hub shell. 1.2 Lubrication No routine lubrication is required.
Assemble the wheel with 3x or 4x spoke lacing, and do not spoke the wheel radially. Otherwise, the spokes or the wheel may get damaged, or noise may occur when braking. Never use alkali based or acid based solvents, such as rust cleaners.
