Αποτελέσματα Αναζήτησης
Getting the right torque on your trailer nuts is essential for the safety of your trailer, our technical torque guide give the optimum torque settings for a variety of common trailer nuts.
Lug Nut Torque Specifications. Must use a torque wrench for accurate results. Re-torque lug nuts at 10 miles, 25 miles, and 50 miles, and then periodically after that.
Using a properly calibrated torque wrench, all the lug nuts installed with any new tire/wheel assembly must have their torque values checked after the first 25, 50, and 75 miles (and periodically checked during normal use).
Lug Nut Type Torque Specifications Wheel Size & Type Wheel Material 1/2" Coned 120 ft-lb steel 9/16" Coned 140 ft-lb steel 5/8" Coned w/Wheel Clamp Ring 190-210 ft-lb 17.5 single or 16" dual steel 5/8" Flanged nuts (rotating flange)*** 190-210 ft-lb 17.5 single or 16" dual steel M22-1.5 Two Piece Flange Nut 450-500 ft-lb 17.5" dual steel
Following the recommended sequence, tighten fasteners per wheel torque requirements diagram. Wheel nuts/bolts should be torqued before first road use and after each wheel removal. Check and re-torque after the first 10 miles, 25 miles, and again at 50 miles. Check periodically thereafter.
5 Αυγ 2024 · These charts provide trailer-specific torque values for each lug nut, taking into account factors such as axle capacity, brake system type, and wheel size. When consulting a trailer-specific torque chart, it’s essential to identify the correct chart for your trailer and wheel configuration.
COMPONENT TORQUE SPECIFICATIONS. Axles, Chassis and Suspension. Wheel Torque Sequence Patterns. *Castle Nut Torque Procedure. Castle nut should be torqued to 50 ft-lbs. Hub will rotate during this process. Loosen castle nut to back off the torque. e nut finger tight.
