Αποτελέσματα Αναζήτησης
16 Δεκ 2018 · There are several test methods available through your local pool and spa dealer. These include drop tests or strips. Either method is fine as long as it measures the following four parameters; pH, total alkalinity, total chlorine and free chlorine or bromine.
12 Ιαν 2024 · OTO stands for Orthotolidine. It has been a chlorine testing method since the 1970s (but can be dated back to 1913!) and is a reliable solution. The OTO is a color-based liquid test that typically turns a sample yellow if chlorine is present. It can test for chlorine levels from 0.5 ppm to 5 ppm.
Poolmaster test kit. This easy-to-use test kit gives you tests for Chlorine, Bromine, pH, Alkalinity and Acid Demand. That, along with taking the necessary steps to maintain your pool water through proper filtration and “chemical feeding”, will ensure clean, clear sparkling pool water. INTRODUCTION
31 Μαΐ 2024 · Chloramines (combined chlorine) can be tested with a DPD test kit. ShockCheck test strips can tell you when shocking is needed to remove chloramine. TDS (total dissolved solids) can be tested with a SafeDip test meter.
Bromine can be used as a disinfectant alternative for chlorine, especially in spas and hot tubs. The bromamines which are formed when bromine is added to pool or spa water are as effective as free chlorine in killing pathogenic microorganisms, therefore total bromine is the key parameter to monitor.
22 Μαρ 2017 · You use a chlorine test kit and find a “free chlorine residual” of 3.0. Using our conversion factor of 2.25, we could accurately say the spa has a bromine residual of 6.75 ppm (3.0 x 2.25 = 6.75).
6 Μαΐ 2022 · Do you need to test your pool water, but are not sure how to use pool test strips correctly? This article will walk you through what to expect from using test strips, how to best use them for an accurate reading, and how to read the test strip results against the provided color chart.
