Αποτελέσματα Αναζήτησης
5 Ιουν 2012 · I assume I need a barrel vise jaws to properly remove and install the flash hider. Can you guys recommend a reasonably priced barrel vise jaw that will do the job. I might only use this thing a half dozen times in my whole life, so I don't want to spent a lot of cash on this.
AR-15 / M16 Barrel Vise Jaws. The perfect armorer tool for holding AR barrels. The Vice Jaws uses 2 “V” blocks that clamp into your bench vise to simplify assembly work. Details: Will work with standard barrels as well as 1″ bull barrels and 3/4″ heavy barrels. Solid high strength aluminum for extreme durablility.
The only way to hold a barrel without damage. Non-marring with milled grooves to accept both standard or heavy barels. Made from solid high strength aluminum for extreme durablility.
5 Μαρ 2022 · You're best served with a heavy duty vise that uses bushings that conform to the barrel taper. This is all about surface area when pulling a barrel that might need 600-1000 ft lbs to break free (yes, I've had 5' cheaters for milsurps).
The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc. The BEV Block mounts securely in a vise and provides support for both billet and forged upper receivers.
The Luth-AR Barrel Vise Jaws are the best armorer tool for holding AR barrels. The Vice Jaws uses 2 “V” blocks that clamp into your bench vise to simplify assembly work.
The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing.
