Αποτελέσματα Αναζήτησης
B-I-N Shellac-Base Primer may be tinted with up to 2 ounces of universal colorant per gallon. Tinting the primer toward the color of the topcoat helps hide in one coat. Note: The addition of universal colorant may prolong the dry time of this product. DRY TIME Dries to the touch in 20 minutes, can be recoated in 45 minutes.
DRY TIME At normal temperatures, B-I-N will dry to the touch in 15 minutes and surfaces can be painted in 30 minutes. CLEAN-UP Wipe off tip before storing. Clean up wet paint with mineral Throw away empty can in garbage pickup. Do not burn or puncture the can, even when empty. CLOGGING If the valve clogs, twist and pull off spray tip and rinse in a
Stain Killing: B-I-N is the ultimate interior stain killing primer. One coat will effectively block stains, including water, nicotine, ink, graffiti, crayon, marker, rust and smoke stains so they won’t bleed into the topcoat. Some stains require a second coat.
B-I-N® Advanced Synthetic Shellac Primer is a synthetic shellac-based primer sealer that provides excellent stain blocking for whole-surface interior priming and exterior spot priming. It combines fast dry time, low odor, excellent hide and stain blocking for new construction, remodeling and fire and water restoration.
ZINSSER ® B-I-N. Fast drying. Superior adhesion to glossy surfaces. High-hiding formula blocks stubborn and persistent stains. Seals porous surfaces. Can be applied in freezing temperatures. Permanently blocks every kind of odor. Seals bleeding knots and sap streaks. Dried film is non-toxic and hypo-allergenic.
24 Ιαν 2024 · B-I-N® is the ultimate primer, sealer and stain killer. It offers unparalleled adhesion on any surface without sanding and has the hiding power to conceal the toughest of stains. Effectively blocks odours. Dries in minutes.
17 Μαρ 2020 · This primer dries to the touch within 10-15minutes. By the time I finish applying the first coat, I can apply a second coat with no wait time in-between. Ideally, the instructions say 30min to recoat but this primer dries so fast often I’ll put on coat #2 after I finish coat #1.
