Αποτελέσματα Αναζήτησης
My active grille is not working, and it is driving me crazy. Getting these two codes from ISTA: 1) LIN Bus, message; radiator blind, top; missing. 2) Signal (status, cooling flap, brake, front axle, 257.6.8) invalid, transmitter DME/DDE.
2 Απρ 2022 · They replaced it but soon after it got fried again. They went back to check the actuator of the shutters and it felt hot. So faulty actuator. I don't think BMW sells the actuator seperately as it comes built-in with the air duct but it would be great if someone can confirm that.
16 Μαΐ 2022 · Here is what I have done: 1) Replaced top radiator blind actuator with a brand new one from BMW. 2) That did not fix the problem, so I checked all the wiring - looks good, and the plug to the actuator is receiving 2-3 volts so power is there.
Enter a BMW fault code (P or hex), complete the captcha, and click "Search". P-Codes will start with a P and are usually generated by generic scanners. Example: P1055. Hex Codes are typically given by more advanced scanners. Examples: 180101 or 1B9308 or 30FF.
13 Απρ 2018 · I had crank and wont start issue last time. Turned out that the power distribution box (under the hood left, passenger side) was faulty. Any good bmw software should be able to diagnose.
28 Μαΐ 2024 · Also, I notice your error codes CD9203, and CD8D2C are both on the same LIN bus. This could mean that both items (electric fan and shutter actuators) do not have logic power. See wiring below.
The previous errors cleared out when clearing the DTC. Now getting two other errors, CD9203-LIN, communication radiator shutter missing and CD9204-LIN, communication lower radiator shutter missing causing the warning indicator on the dash again. sorry for update.
