Αποτελέσματα Αναζήτησης
Griplock® Systems provides the ultimate adjustable cable suspension system for suspended ceilings. Architectural ceilings, acoustic tile ceilings, canopies, clouds, overhangs, foyer displays – the Griplock® cable suspension system is fast, easy to install and re-usable.
- Cable Couplers 3
Lighting. Griplock® Cable Grippers; Aircraft Cable &...
- Griplock Grippers
Lighting. Griplock® Cable Grippers; Aircraft Cable &...
- T-Bar Clips 5
Aircraft Cable; Shelving. Ceiling Mounts; Floor Mounts ......
- Cable Couplers 3
14 Ιαν 2018 · Providing a conduit or trunking system, or cable tray (metallic or non-metallic), fixed at suitable spacings to the building structure above the ceiling, or to walls or other structural elements.
Rockfon-Soffits in Suspended Ceilings-soffits for exposed ceiling grid drywall furring systems-Installation Guide. 1. Exposed Systems. Soffits for exposed systems can be made in two ways. Where upper and lower ceiling levels must be centered independently or where the module must change from level to level, the method shown in (Fig. 1.1) is used.
systems and wireless antenna panels, suspended ceilings deliver functionality to the building owner. For the construction team they offer a rapidly installed, dry and relatively clean process. However, for the completed ceiling to meet the legitimate expectations of the building owner, occupier, design
Wire suspension hanging kits from Carl Stahl Technocables are reliable, variable, easy to install and available as single elements or suspension sets consisting of ceiling bracket, wire rope and cable gripper. We have a wide range of components in stock, offering the right solution for every application.
ceiling systems, as described in this guide and as recommended by the manufacturers of the ceiling systems, will help to prolong the life of the ceiling system. Good practices for maintenance will also help reduce waste by retaining systems in place without the need for replacement due to damage caused by misuse.
Used to support bus bars, cable trays and other components with 3/8" threaded rod from the suspension system face. Used at all cross tee-to-cross tee or main beam-to-cross tee connections. Attaches to the top bulb of the PRELUDE XL Max suspension system to hold ceiling panels in place.
