Αποτελέσματα Αναζήτησης
The purpose of this document is to discuss the requirements for planning and performing an incidental lift using an overhead crane and commonly available rigging components, such as slings, shackles, eye bolts, and turnbuckles.
1 Φεβ 2021 · The purpose of this Crane and Rigging Manual is to provide Sundt Authorized Operators, Qualified Riggers, Assembly/Disassembly Directors, Qualified Crane Managers, Site Managers, Project Managers, and HSE personnel with the requisite policy, procedure, standard, and regulation information needed
15 Μαρ 2024 · The RIGGING HANDBOOK is a well-illustrated reference source created for rigging professionals, crane operators, and others that perform rigging and hoisting operations. This handbook essentially represents the working notebook of the author.
Handbook of Rigging (fourth ed). Since 1980, he has served as chief editor for a number of international publications, including Private Power Executive, Information Display, and Computers for Design & Construction. In 1974, he received the industry’s top Technical Article Award for his chapter “Will Solid Wastes Bury Us?”—published
Most crane and rigging accidents can be prevented by field personnel following basic safe hoisting and rigging practices. Labour and management both have a responsibility to ensure the safety of all parties involved in hoisting and rigging. Major rigging operations must be planned and supervised by competent
When properly located on a site, cranes can strategically lift and lower loads to virtually any desired location on a construction site. Unfortunately, when large numbers of cranes have been dispatched to a construction site, the hazard exposure also increases for construction workers who work with, around or under these cranes.
(e) ensuring that the area for the crane is adequately prepared. The preparation includes, but is not limited to, the following: (1) access roads for the crane and associated equipment (2) sufficient room to assemble and disassemble the crane (3) an operating area that is suitable for the crane with respect to levelness, surface conditions,
