Αποτελέσματα Αναζήτησης
Be sure that the power is disconnected from the machine before tools are serviced or an attachment is to be fitted or removed. Never leave the machine with the power on. Do not use dull, gummy or cracked cutting tools. Be sure that the keys and adjusting wrenches have been removed and all the nuts and bolts are secured. Limited Warranty.
Set the fence parallel with the blade by loosening the drift release and drift pivot clamps and adjusting the drift adjusting disc. Clamp the drift release and drift pivot clamps. It is not important that it is exact, as you will be readjusting later in the procedure.
This manual applies to the DXIII Driftmaster fence system. Enter the model number, serial number and purchase information below for quick reference when ordering accessories, supplies or parts. Model: ___________. Serial: ___________. Date of purchase: ___________. Place of purchase: ___________.
Ruler Adjustment: After the desired bandsaw blade has been installed and properly tensioned and the fence has been adjusted for blade drift, move the fence close to the blade. Using a ruler, measure the distance between the blade and the fence.
28 Φεβ 2013 · The black angle keeps the fence down too. There's a round headed plastic piece that rides on the top of the white angle. I'm going to make something that will fit into the slot and snug down easier when my brain gets one of those light bulb moments.
27 Σεπ 2011 · Loosen the fence clamp handles, and using a rubber mallet, tap the universal mounting bracket so that the bottom of the fence support table is level with the bottom of the fence. Fully...
28 Φεβ 2013 · The Laguna Driftmaster Thread Jump to Latest 3K views 2 replies 2 participants last post by dodgeboy77 Mar 1, 2013
