Αποτελέσματα Αναζήτησης
1.1.2 Transmitters can be operated and adjusted using an inbuilt keyboard or remotely using HART-compatible device. 1.1.3 Transmitters with HART can transfer information about measuring value in digital form via the 2-wire connection line along with 4-20 mA current signal. Digital signal can be received and
Dual ball-bearing drive axles and four individually driven wire feed rollers make the wire feed mecha-nism highly precise and robust with a long service life. When combined with power sources and weld-ing torches from ewm, the result is a perfectly balanced and complete system, whose sum total is truly more than the individual parts.
SATEC’s BFM-II is the second generation of Branch Feeder Monitor™, providing energy management for multi-point power solutions. Ideal for both new and retrofit projects, the BFM-II automatically provides metering, demand and energy readings, logging and multi-tariff (TOU) data.
4AI: four analog inputs, selection of: 0-20mA, 4-20mA, 0-1mA and ±1mA output; 1 cycle update time. Maximize energy efficiency with SATEC's BFM-II, Click & find a compact Branch Feeder Monitor for effective multi-circuit power monitoring.
EMI can easily induce a voltage onto the wires, making cable break detection unreliable when voltage signals are used. Isolating the measurement protects downstream equipment from damage due to high common mode voltage, and eliminates error due to ground loops.
When insulation and voltage tests are to be carried out, the device must be isolated from the system for the test period. In order to check the proper connection of the LIM, it is recommended to carry out a functional test, before starting the LIM. Please check whether the basic setting of the devices complies with the system requirements.
The quickest and most cost-effective way to add monitoring to existing tap-offs and end feeds. Compact enclosure uses easy single hole mounting system with no voltage connections needed for installation in minutes; Each module monitors 3 or 6 circuits; up to 96 circuits per Core Module using any combination of 3 or 6 circuit monitors
