Αποτελέσματα Αναζήτησης
EMPI D Carburetors feature a series of Progression Ports that allow for extremely smooth acceleration and drivability. 40mm & 45mm Carburetors feature 5 Progression Ports - 36mm Carburetor features 6 Progression Ports.
This linkage adapter is designed for use with Weber progressive carburetor conversion kits on all VW cars and the Porsche 914/4. The linkage plate has four holes drilled in it for the various different applications.
Your EMPI carburetor(s) come equipped with the Main, Air, and Idle jets most often used in the kit’s particular application. Although it is a bolt-on kit, with the necessary hardware, gaskets and linkage to install the carburetor(s) onto the desired motor – The carburetor(s) are not jetted size specific.
98-1289-B EMPI 34PlCT-3 Carb Initial Set-Up and Adjustment The target Idle Speed for this carburetor is 850-900 RPM. This ad'ustment will be obtained by adjusting the Volume and By-Pass Screws — NOT the screw on the Throttle Arm.
EMPI INSTALLATION INSTRUCTIONS FOR DUAL EMPI 34 & EPC 34 KITS READ THOROUGHLY ALL STEPS OF THESE INSTRUCTIONS BEFORE BEGINNING THIS INSTALLATION. 2- 2- 2- TOOLS AND EQUIPMENT NEEDED: Combination, box or open end wrenches (metric + U.S.) Socket set metric Screwdriver (Regular and Phillips) PARTS SUPPLIED WITH INSTALLATION KIT: 2 1 1 - Gasket set
Install carb base gaskets and carburetors on new manifolds. Linkage arms on carbs are to face the rear of the vehicle. Remove rags from intake ports and install manifolds with carbs using intake gasket supplied. Remove nut from engine case stud and upper-left backing plate screw.
Follow carburetor adjustment instructions and/or watch our video at EMPIUS.com. The adjustment procedure will be similar to the Single I-IPMX installation, as this is a synchronous 2-barrel carburetor with 2
