Αποτελέσματα Αναζήτησης
Open-grain woods such as oak, walnut or mahogany require two, sometimes three thin seal coats of EnviroTex® Lite prior to flood coating. This prevents air from escaping from the wood into the thick fluid.
27 Οκτ 2020 · Sealing New Surfaces & Preparing Old: New Wood Surface: Requires a thin seal coat of Envirotex Lite prior to flood coating. Mix approximately 1/4 the amount you would use to flood coat. Spread thinly over entire surface then scrape off all excess with a piece of cardboard or plastic spatula.
Large or small, preparation is important. Table must be dry, sanded, level, free from sawdust, dirt or loose charred wood. Most raw wood is porous and should be sealed to prevent air bubbles from escaping into the final coat (see “seal coats”). After seal coat, flood generously with EnviroTex Lite.
26 Οκτ 2016 · Two seal coats are recommended, fabric may require three seal coats. Glue must be thoroughly dry before coating with EnviroTex Lite®. Seal Coats. Open-grain woods such as oak, walnut or...
EnviroTex® Spray Sealer No. 4013 is available in a 13 oz. spray can. lt is very fast drying and provides a quick re-coat over paper or wood and “stiffens” soft items such as dry flowers or fabrics.
26 Οκτ 2016 · Sealing New Surfaces & Preparing Old: New Wood Surface: Requires a thin seal coat of Envirotex Lite prior to flood coating. Mix approximately 1/4 the amount you would use to flood coat.
ETI Resin Spray & Sealer is a fast drying, high solids acrylic spray. This product is ideal for sealing porous surfaces such as paper or wood prior to flood coating with EnviroTex Lite.
