Αποτελέσματα Αναζήτησης
Thermal expansion tanks eliminate this wasteful, costly and dangerous practice. The thermal expansion tank is certiied to NSF/ANSI-61 DHOT (140° F) and pressures to 150 PSI. DO NOT USE A STANDARD TANK. The sizing chart will allow you to choose the correct size expansion tank for your application. When water is heated it expands.
10 Αυγ 2024 · Choosing the right location for a water heater expansion tank can impact efficiency. Professional installation ensures optimal placement, while DIY efforts might lack precision. Properly installed tanks prevent pressure issues and extend appliance lifespan.
Proper thermal expansion tank sizing depends upon the volume of water being heated, the temperature and the incoming water pressure – please refer to the Quick Sizing Chart on the opposite side to properly size your thermal expansion tank
To select the correct expansion tank, using the selection guides in this product guide, choose the supply pressure (for pressures between those shown, use next highest supply pressure), read across the chart to the correct tank as indicated by the water heater
Expansion Tank Sizing Chart For Residential Water Heaters. Water Heater Capacity in Gallons. *Highest recorded inlet water pressure in a 24-hour period of regulated water pressure. CONN. SIZE (MPT) . ONE-YEAR LIMITED WARRANTY. Up to 52 gal. Up to 100 gal. FIVE-YEAR LIMITED WARRANTY. Up to 52 gal.
Expansion tanks are necessary to protect water heaters and water pipes within a plumbing system due to expansion caused by hot water. An extremely important part of maintaining your expansion tank is checking the pressure.
1. Shut the cold water supply off and relieve water pressure. 2. Assemble the saddle valve to the piping as shown. Using wrench provided, tighten the saddle valve to pierce the line and compress the gasket seal. Alternate screws while tightening. 3. Install the tank using pipe sealing tape or paste. 4.
