Αποτελέσματα Αναζήτησης
Step 1. Identify all the components of the Flat Track. Step 5. Hang the track from the two end holes. Hardware set. Review the exploded view diagram to better visualize the install. Step 2. Identify track header material to determine the correct fasteners. Place the spacer (with. the flange side against the. wall) between the track and the wall.
IDENTIFY TRACK HEADER AND CENTERLINE! Identify track header material (wood, concrete, etc.). This determines the correct header fasteners to use, found in your local hardware store, or available for doors up to 1 ¾”max thickness. To locate the vertical centerline of the track, use this formula:
This document provides fitting instructions for a Flat Track 100 sliding door system in 4 steps: 1. Fix the track to the wall using spacers, screws, and ensuring that the track is level. 2. Prepare the door by drilling holes for hangers and cutting a slot for the guide. 3. Fit the door on the track by placing the hangers over the track and ...
All components must be selected according to the track profile in order the system to be functional. Should you be using hanger 23.R91, then track 23.000, support bracket 23.B.., stopper 23.X01 or 23.X04 and so on, are required.
Element Designs can provide complete door systems with sliding hardware and guides/ rails cut to size, making the door installation process simple. Our customer service, quick lead times and quality are the foundation of our company.
15 Μαρ 2021 · POCKET DOOR INSTALLATION INSTRUCTIONS • When installing a three track MultiSlide the screw pattern should be every 16 inches in the outer and inner track. Pre drill 3/8” holes in these tracks, make sure it’s not on the die line but towards the center of the frame. (Fig. D). • When installing a four track MultiSlide the
Door Grid Assembly Doors should be assembled in a flat area. The horizontals are to be equally spaced. The number required per door and spacing is shown in table. The inside face of the door frame should be assembled first.
