Αποτελέσματα Αναζήτησης
The Garmin® GA 30 GPS antenna provides GPS information to your compatible Garmin chartplotter. The GA 30 connects to compatible Garmin chartplotters using a BNC connector. Install the GA 30 antenna according to the following instructions. You need the appropriate fasteners, tools, and mounts listed in each section.
Page 4 Mounting the GA 30 Antenna You can surface mount the GA 30 antenna, attach the antenna to a standard 1 in. OD pipe- threaded-pole marine mount (14 threads-per-inch—not included), or install the antenna under fiberglass. Select a suitable location for the GA 30 antenna on your boat.
This STC is for physical installation and mounting of the antenna(s) and does not include functional operation. The antenna(s) do not require overhaul at a specific time period.
This document provides installation instructions for the GA 35, GA 36, and GA 37 antennas. It is intended for use by persons certified by the Federal Aviation Administration (FAA) to install avionics equipment.
The GA 3X Series antennas includes GPS/WAAS antennas and GPS/WAAS with XM combination antenna. The coax cable interface to the receiving equipment provides both power to the antenna preamp from the receiving equipment and signal back to the receiving equipment. For receiving equipment
Page 2: Remote Gps Antenna Installation Instructions Stainless-steel screws may bind when screwed into fiberglass and overtightened. Garmin recommends applying an anti-seize lubricant to the screws before installing them. Before you permanently mount the antenna, you must test the •...
• Connecting the chartplotter to a GA 30 remote GPS antenna (page 6). • Connecting the chartplotter to a Garmin marine radar (page 6). • Connecting the chartplotter to other NMEA 0183-compatible devices such as a VHF radio with DSC (page 5).
