Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

  1. 30 Οκτ 2024 · Inserting the New Latch. To start, insert the new latch into the edge of the door. Make sure the smooth side faces the direction the door closes. Slide it in until the latch plate is flush against the door. Use two screws to secure it, one at the top and one at the bottom. This step is crucial for proper functionality.

  2. 10 Νοε 2023 · You need to find a small Allen Wrench which fits the socket in the end of this grub screw. Slide the door handle back on, then use the Allen-Wrench to back the screw out 1 or 2 turns so that it grips into the hole in the door handle.

  3. 2 ημέρες πριν · Handle set screw package for A-Series Hinged and Outswing Patio doors and 400 Series Frenchwood® Hinged and Frenchwood® Outswing patio doors. 1999 to Present. Package includes 4 - 1/4-20 UNC knurled cup point set screws and 1 - 1/8 Allen wrench. *Replacement set screw finish may not match original.

  4. Includes: − Interior lever (A) with 00142006 spindle, escutcheon plate and hardware. − Exterior lever (B) with escutcheon plate and hardware. − Exterior escutcheon plate gasket (C) − Exterior escutcheon plate (D) − Two piece spindle (E)

  5. Pair of Set Screws & Hex Key for Doorknobs. The set screws work with traditional-style doorknobs that take threaded spindles. Thread size of the set screw is 32 TPI x 1/4" diameter, which is a common thread size for holes on old-style doorknobs. Available in brass finish, oil rubbed bronze, & polished nickel finishes.

  6. 16 Αυγ 2022 · Use a screwdriver or an allen wrench to tighten the set screw and ensure that the door handle won't slip off the base. Repeat the process with the handle on the other side of the door, then test to make sure that the repair worked.

  7. If you are experiencing the lever falling off, the set screw is still in the shaft. If you remove the lever and on one side of the shaft there is a hole and the other side there is a silver button. That silver button is the set screw. Place the lever back on to the shaft, using a 3/32 hex wrench tighten the screw through the lever and shaft.;

  1. Γίνεται επίσης αναζήτηση για