Αποτελέσματα Αναζήτησης
5 Μαΐ 2019 · The barrel on this 6.5-284 stainless steel Savage Model 116 needs to be removed, but it had a smooth barrel nut. What to do now? A quick internet search of “Savage smooth barrel nut removal” turns up many ideas, most of them bad.
16 Φεβ 2017 · You can feel it when you twist a barrel nut on that has a tight fit - almost grinds. I think most of this has to do with surface finishes "mating in" over time under torque. Heat/cool all you want, nothing except a die grinder and a new nut - with some type of anti-siieze - is going to solve it.
14 Νοε 2011 · You remove the two pins and the one screw in post that is right over the pin after the pin is out. The gun should be stripped to just the barreled action. I have a home made barrel pusher, just threaded rod with a piece of round brass threaded over it, cut just under bolt size in diameter about 1" long and it is drilled and tapped for an allen ...
2 Ιουν 2014 · The quickest and easiest way to remove a smooth barrel nut from the factory is to use a pipe wrench and replace it with a slotted or smooth nut. With all the blasting grit and bluing salts they are tough to break loose the first time even with a SSS smooth nut wrench.
11 Ιουν 2012 · 28. Stuck barrel nut. So I'm in the process of trying to get my barrel nut removed from my .308 with the factory 22" sporter barrel on it. Apparently I got one of the ones with the gorrilla tightened nut.
8 Οκτ 2013 · I put the barrel in a barrel vice and use an action wrench to back (unscrew) the action away from the nut. No muss, no fuss. As soon as the action breaks away from the nut, the nut and barrel unscrewed by hand.
16 Ιουν 2007 · Remove the bolt handle, remove the baffle assembly, pull out the cocking piece pin, and remove the cocking piece sleeve followed by the firing pin assembly. Now, pull the bolt head off the front of the bolt.
