Αποτελέσματα Αναζήτησης
Knox Residential Box is inherently a very strong device that must be mounted properly to ensure maximum security. A limit of two (2) keys may be hung on the inside key hook. THE UNIT WILL NOT HOLD MORE THAN TWO (2) KEYS.
The optional Recessed Mounting Kit is for use in new concrete or masonry construction only. The kit includes a shell housing and mounting hardware to be cast-in-place. construction is completed. Rough-in Dimensions: 6-1/2"H x 6-1/2"W x 5"D Installation: Mounting kit may be fastened to inside wall of a concrete form or set in place during ...
The optional Recess Mounting Kit is for use in new concrete or masonry construction only. The kit includes a shell housing and mounting hardware to be cast-in-place. The KnoxBox is mounted into the shell housing after construction is completed. Rough-in Dimensions: 6-1/2" H x 6-1/2" W x 5" D Installation: Mounting kit may be fastened to inside wall
KNOX ELOCK CORE INSTALLATION Assemble the Knox eLock Core: Line up the sidebar of the Knox eLock Core with the groove in the Lock Shell and slide the Lock Core into the Lock Shell from the outside of the door. Insert the Dust Cover, Dust Cover Bracket, and the Knox eLock Shell into the outside of the door as shown in Figure 2 on Page 1.
1) Always mount the Knox Box to a secure, solid wall, bean or post. 2) Mounting the Knox box at a height of six (6) feet above the ground surface is recommended to resist vandalism. 3) Use a small level to plumb the box square.
20 Φεβ 2013 · Leave cover<br />. and screws in place until the KNOX-BOX is ready for<br />. mounting inside. The four (4) mounting studs may<br />. be replaced with Grade 5 or Grade 8 bolts or longer<br />. studs if required. Two (2) long sheet metal screws are<br />. provided for attachment of shell housing to the inside<br />.
The optional Recessed Mounting Kit is for use in new concrete or masonry construction only. The kit includes a shell housing and mounting hardware to be cast-in-place. The KNOX-BOX is mounted into the shell housing after construction is completed. Rough-in Dimensions: 6-1/2"H x 6-1/2"W x 5"D Installation: Mounting kit may be fastened to inside wall
