Αποτελέσματα Αναζήτησης
1. Place the Knox Residential Box with hanger over the top of the entry door. Position the unit on the hinged side of the door. 2. Check to see that the hanger does not interfere with the door weather seal. 3. For semi-permanent installation, fasten hanger to door with small screws or nails to prevent removal. 4.
7 Φεβ 2011 · Per the Knox installation instructions, all boxes should be attached to a solid wall, beam or post using at least 4 Grade 5 or 8 fasteners of 3/8” diameter. If the box is mounted on a secure wall per the Knox installation instructions, it will be extremely difficult to knock the box off the wall.
Knox Rapid Access System provides non-destructive emergency access to commercial and residential properties.
26 Σεπ 2017 · A Knox-Box is primarily used for emergency access to public, residential or commercial buildings. The box, also known as a rapid entry system, allows emergency fire and medical personnel quick entry into the building without the use of damaging force.
If installing the box on a thin or hollow wall, use a solid backing (like 3/8" steel plate fastened to solid studs on both sides) for secure mounting. Mounting to solid beams or steel support is best. Installation of this product should be performed only by individuals skilled in the use of the tools and equipment necessary for installation.
and TUB SPOUT when installing. UP 4 UP 2 1 1 2 UP 1 LASTR UAR Figure 2. Figure 1. Figure 1a. 1 Figure 2a. 3 4 H C Off 3 4 H C Off UP 4 13 12 3 5 2 1 9 7 8 10 11 6 1-1/2" REF. H C Off • When finished tiling the wall, remove PLASTER GUARD (3). Push on CAP (1). • Mount ESCUTCHEON (2) and with SCREWS (7). • Install HANDLE (8) by pushing it ...
Installation 1. Open your ArmSafe® Kit, it contains: 1 Female Deans® Ultra® Plug, 1 Black Base, 1 Aluminum Nut Ring, 3 Pan Head Screws 2-56 x 1/2, 2 Sharp Point 4-40 x 3/16 Set Screws, 18” of High Flex Silicone Wire, Shrink Tubing, and 1 Arming Plug. 2. Select the mounting location for the ArmSafe® Base in your RC model. The
