Αποτελέσματα Αναζήτησης
1. Place the Knox Residential Box with hanger over the top of the entry door. Position the unit on the hinged side of the door. 2. Check to see that the hanger does not interfere with the door weather seal. 3. For semi-permanent installation, fasten hanger to door with small screws or nails to prevent removal. 4.
Knox Rapid Access System provides non-destructive emergency access to commercial and residential properties. More than 14,000 fire departments and government agencies use Knox key boxes (keybox, keyboxes), vaults, cabinets, key switches, padlocks, narcotics or drug lockers, locking FDC caps or plugs and electronic key retention units for safe ...
KNOX-BOX prior to installation. When not mounted, the door will be OPEN. Always hold box and door securely to prevent door closing on fingers and causing injury. Large Tamper Switch: Remove the tamper switch assembly and set aside for installation after the box is mounted. 2 Always mount your KNOX-BOX to a secure, solid wall, beam or post. 3
The Honeywell Pressure Switches, High Pressure, Medium Pressure, and Low Pressure, are capable of being mounted in any orientation via a threaded port. A 27 mm hexagonal wrench should be used to install the pressure switch. Installation torque should be based on the information in Table 1. Installation of
BOX includes tamper switches, install the tamper switch assembly after the box is mounted and check to see that the “box to wall” plunger is properly depressed.
View and Download Knox KLS-1500 installation manual online. ELOCK CORE RETROFIT. KLS-1500 locks pdf manual download.
WARNING: Read all instructions carefully before beginning installation. This unit must be installed by a qualified installer and in accordance with applicable local codes and ordinances that govern this type of equipment.
