Αποτελέσματα Αναζήτησης
KNOX ELOCK CORE INSTALLATION Assemble the Knox eLock Core: Line up the sidebar of the Knox eLock Core with the groove in the Lock Shell and slide the Lock Core into the Lock Shell from the outside of the door. Insert the Dust Cover, Dust Cover Bracket, and the Knox eLock Shell into the outside of the door as shown in Figure 2 on Page 1. Install ...
1. Place the Knox Residential Box with hanger over the top of the entry door. Position the unit on the hinged side of the door. 2. Check to see that the hanger does not interfere with the door weather seal. 3. For semi-permanent installation, fasten hanger to door with small screws or nails to prevent removal. 4.
View and Download Knox KLS-1500 installation manual online. ELOCK CORE RETROFIT. KLS-1500 locks pdf manual download.
ML14XC1 Air Conditioners, which will be referred to in this instruction as the outdoor unit, uses HFC-410A refrigerant. This outdoor unit must be installed with a matching indoor unit and line set as outlined in the Lennox ML14XC1 Engineering Handbook.
All illustrations in this instruction are typical and do not always represent the exact appearance of the equipment. IMPORTANT. The compressor in this unit contains PVE oil (Polyvinylether). PVE oil is formulated for hydrofluorocarbon (HFC) refrigerants, such as HFC-410A, which this system contains.
identical refrigerant circuits with 3-ton cooling capacities. The SG 060 gas/electric packaged rooftop unit is avilable in 70,000, 108,000, and 150,000 Btuh heating input.
Knox Rapid Access System provides non-destructive emergency access to commercial and residential properties. More than 14,000 fire departments and government agencies use Knox key boxes (keybox, keyboxes), vaults, cabinets, key switches, padlocks, narcotics or drug lockers, locking FDC caps or plugs and electronic key retention units for safe and secure rapid entry.
