Αποτελέσματα Αναζήτησης
1 Νοε 2022 · Titanium (Ti) alloys, in particular Ti-6Al-4V (Ti64), with outstanding weldability, fabricated by Laser Powder Bed Fusion (L-PBF), have drawn enormous attention due to the high strength-to-weight ratio and excellent corrosion resistance for applications in aerospace and bio-medical sectors.
28 Ιουλ 2008 · The thermodynamic properties of liquid Ti–Al–V alloys, as well as of constitutive binary systems—Ti–Al, Ti–V, Al–V have been obtained using FactSage Thermo-chemical Software and database. Thermodynamic results were calculated at different temperatures in the range 2000–2273 K.
5 Σεπ 2019 · Bulk forged Ti64–6Mo alloy exhibited high strength and moderate plasticity after α/β-phase-field solution treatment plus aging. The tensile properties of the alloy were determined by the size and morphology of the primary and secondary α phases and by the β grain size. The original version of this article unfortunately contained a mistake.
14 Μαΐ 2014 · In the Al-Ti-V ternary system, there exist many intermediate phases, including Ti 3 Al(α 2), TiAl(γ), TiAl 2, Ti 2 Al 5, H_TiAl 3, (Ti,V)Al 3 (ξ), and Al 8 V 5, which are modeled using compound energy formalism (CEF).
1 Ιαν 2022 · It is revealed through statistical analysis of the in-situ strain mapping results that a moderate partitioning trend exists between α- and β-phases, and that the present alloy is characterized by the eminent strain localization bands that develop at the early stage of plastic straining.
23 Αυγ 2018 · Diffusion in the Ti-Al-V system is studied and a CALculation of Phase Diagrams (CALPHAD) diffusion mobility description is developed. Diffusion couple experiments are performed to obtain diffusion paths in the hcp phase at 923 K, 1023 K and 1123 K.
7 Ιουλ 2023 · In Ti-V-Cr alloys, the influence of V element on high temperature properties is mainly focused on the improvement of thermal conductivity and high temperature deformation properties, while the influence of Cr element is relatively weak.
