Αποτελέσματα Αναζήτησης
4 Αυγ 2023 · Roomba® i Series will tell you something is wrong with the light ring around the CLEAN button appearing solid red, followed by a narrated voice message. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button. If Roomba® is turned on, you can also press the bumper to repeat the message.
- Error 16, Roomba® j Series and Combo 10 Max - iRobot Customer Care
Error sixteen (16) means Roomba® is not able to start...
- Error 16, Roomba® j Series and Combo 10 Max - iRobot Customer Care
24 Ιουλ 2024 · Error sixteen (16) means Roomba® is not able to start cleaning because it is tilted, or the bumper is possibly dislodged from the robot. If found, use the dislodged bumper to guide you through steps on fixing the bumper.
29 Ιουν 2023 · Error 16 means Roomba® is not able to start cleaning because it is tilted or the bumper is possibly dislodged from the robot. If found use to guide you through steps on how to fix the bumper. If the bumper is not dislodged from the robot, move Roomba® to a flat surface then press CLEAN to restart.
24 Φεβ 2024 · Roomba 900 series error messages chart. Roomba will tell you something is wrong with a blinking troubleshooting indicator and a two tone “uh-oh” sound followed by a narrated voice. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button.
Error 16 means Roomba® is not able to start cleaning because it is tilted or the bumper is possibly dislodged from the robot. If found use to guide you through steps on how to fix the bumper. If the bumper is not dislodged from the robot, move Roomba® to a flat surface then press CLEAN to restart.
19 Νοε 2021 · Error nine (9) means the bumper is stuck and is not moving freely. Briskly tap the bumper several times to dislodge any debris that may be trapped underneath, and then press CLEAN to restart. If no debris is found, it is also possible the bumper could be dislodged from the robot.
19 Νοε 2021 · Error nine (9) means the bumper is stuck and is not moving freely. Briskly tap the bumper several times to dislodge any debris that may be trapped underneath, and then press CLEAN to restart. If no debris is found, it is also possible the bumper could be dislodged from the robot.
