Αποτελέσματα Αναζήτησης
19 Νοε 2021 · Error nine (9) means the bumper is stuck and is not moving freely. Briskly tap the bumper several times to dislodge any debris that may be trapped underneath, and then press CLEAN to restart. If no debris is found, it is also possible the bumper could be dislodged from the robot.
19 Νοε 2021 · Error nine (9) means the bumper is stuck and is not moving freely. Briskly tap the bumper several times to dislodge any debris that may be trapped underneath, and then press CLEAN to restart. If no debris is found, it is also possible the bumper could be dislodged from the robot.
4 Αυγ 2023 · Description. Roomba® i Series will tell you something is wrong with the light ring around the CLEAN button appearing solid red, followed by a narrated voice message. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button. If Roomba® is turned on, you can also press the bumper to repeat the message.
24 Φεβ 2024 · Roomba 900 series error messages chart. Roomba® will tell you something is wrong with a blinking troubleshooting indicator and a two-tone “uh-oh” sound followed by a narrated voice. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button.
19 Νοε 2021 · Error 9 means the bumper is stuck and is not moving freely. Briskly tap the bumper several times to dislodge any debris that may be trapped underneath, and then press CLEAN to restart. If the message persists, please contact iRobot Customer Care .
24 Απρ 2019 · Problem. s9 when docked s9 will back out of the dock and do a few back wards turns and then stop. Then gives me a Error 9 warning. Manual stuff. Error nine (9) means your s Series Roomba bumper is stuck and is not moving freely. Your robot may exhibit behavior such as backing up or spinning in an unexpected manner.
4 Αυγ 2023 · Roomba i Series will tell you something is wrong with the light ring around the CLEAN button appearing solid red, followed by a narrated voice message. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button. If Roomba is turned on, you can also press the bumper to repeat the message.
