Αποτελέσματα Αναζήτησης
4 Αυγ 2023 · Description. Roomba® i Series will tell you something is wrong with the light ring around the CLEAN button appearing solid red, followed by a narrated voice message. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button. If Roomba® is turned on, you can also press the bumper to repeat the message.
- Connectivity Error Codes
Scan down the list, locate your error number, and follow the...
- Roomba i Series: Error 7
Error 7 means the left side wheel cannot turn. This can...
- Connectivity Error Codes
4 Αυγ 2023 · Roomba i Series will tell you something is wrong with the light ring around the CLEAN button appearing solid red, followed by a narrated voice message. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button. If Roomba is turned on, you can also press the bumper to repeat the message.
19 Νοε 2021 · Error nine (9) means the bumper is stuck and is not moving freely. Briskly tap the bumper several times to dislodge any debris that may be trapped underneath, and then press CLEAN to restart. If no debris is found, it is also possible the bumper could be dislodged from the robot.
18 Ιαν 2024 · Scan down the list, locate your error number, and follow the troubleshooting steps. Sometimes, you may only need to follow the first step to resolve the issue. If these steps are not helpful, please follow the steps in the Cloud and Wi-Fi Connectivity Troubleshooting Guide instead.
28 Αυγ 2024 · Error 7 means the left side wheel cannot turn. This can happen if Roomba i Series was started on an uneven surface or got stuck on an obstacle. If this is the case, lift Roomba off the floor and place it in the center of the room and restart the clean cycle.
19 Νοε 2021 · Overview. Error 9 means the bumper is stuck and is not moving freely. Briskly tap the bumper several times to dislodge any debris that may be trapped underneath, and then press CLEAN to restart. If the message persists, please contact iRobot Customer Care. Loading. Roomba: Error 9.
24 Φεβ 2024 · Roomba® will tell you something is wrong with a blinking troubleshooting indicator and a two-tone “uh-oh” sound followed by a narrated voice. Refer to the following chart. Error messages can be repeated by pressing the CLEAN button. If Roomba® is turned on, you can also press the bumper to repeat the message.
