Αποτελέσματα Αναζήτησης
If a new cylinder head has been installed, then new taptite bolts must be used to install the supercharger. NOTE: New taptite bolts when used cut their own threads on the first application. Special Tool(s): 303-1449-01, 303-1449-02. 6.
20 Νοε 2017 · This is usually the plastic coupling or Torsional isolator, you can buy the parts to do this from Jaguar (See TSB attached) . To check disconnect the drive belt and rock the pulley forwards and back to check for play.
29 Δεκ 2020 · Supercharger oil change and coupler replacement The supercharger in the 3.0L V6 F type S is an Eaton TVS 1320 ( the V8 version is the TVS 1900). The super charger coupler (also called isolator) is the join between the input shaft (driven by the belt) and the turbine.
JLR AJ133-V8 Supercharger upgrade. JUL 2023 - Rev 0. Important Information. Installing the supercharger indicates your acceptance of the responsibility and liability associated with the fitment and use of this product.
10 Αυγ 2008 · Hi, The drive coupler of my (XKR 2001) supercharger (Eaton M112 with specific casing) is making some rattling at idle; time to change it. I found the right oil (see other post), and the coupler on Ebay, but now I…
9 Φεβ 2020 · Renew the coolant expansion tank/reservoir as well and the hose/pipe that runs from it. Consider an SC rebuild kit (coupler, bearings and oil) not just coupler and oil, plenty of kits on Fleabay. As well as the coolant pump renew the thermostat.
21 Σεπ 2018 · After a lovely 2 week 2200 mile tour of Germany and Austria, I now need to change the supercharger coupler. It has got a lot noisier since the trip. The noise in the clip is when the engine is cold, it is much quieter when warm and the car drives perfectly with no warnings.
