Αποτελέσματα Αναζήτησης
This online calculator has been developed exclusively for use with the AMT Calcium Chloride (CC) Moisture Test Kit. Please enter the location, date, time and weight (in grams).
14 Ιουλ 2023 · The ASTM F1869 standard provides the guidelines for conducting the calcium chloride moisture test, used in measuring the moisture vapor emission rate (MVER) for concrete subfloors. This test can be done using the calcium chloride moisture test kit which is readily available for about $20.
here are your results (lbs. of moisture emitted over 1000 sq. ft. in 24 hrs.) Note: This on-line calculator has been developed exclusively for use with Taylor CaCl Test Kits.
The formula for calculation of test results is as follows: MVER = 24,000 X Gain / 453.612 X Area X Time MVER = Moisture Vapor Emission Rate Gain = Weight gain of calcium chloride crystals in grams *Area = Area of dome contact to slab, less area of dish contact in square feet.
floor covering installation and concrete surface preparation equipment. calcium chloride moisture test kit calculator. back
Calcium Chloride Moisture Calculator. print results. Use the following equation to determine the vapor emission volume in Pounds per 1,000 square feet in 24 hours. Weight Gain: grams X 118.932 Always round to the nearest tenth. Total Hours:
1. Expose a minimum area of 20 by 20 in. (50.8 by 50.8 cm) to conditions specified above for a minimum period of 24 hrs. prior to starting each test. Weigh the container of calcium chloride, including the container lid and the label which should be affixed to the lid.
