Αποτελέσματα Αναζήτησης
The internal wiring diagram of the Lynx Distributor. 3.2. Fuse detection. The Lynx Distributor monitors each fuse and will detect a blown fuse. When a fuse blows, the red fuse LED will illuminate, the power LED will turn red and an alarm message is send to a connected Lynx Smart BMS.
Internal parts and wiring diagram Lynx Distributor The internal physical parts and the wiring diagram of the Lynx Distributor indicating the following parts: • Positive busbar
The internal wiring diagram of the Lynx Distributor. 3.2. Fuse detection. The Lynx Distributor monitors each fuse and will detect a blown fuse. When a fuse blows, the red fuse LED will illuminate, the power LED will turn red, and an alarm message is sent to a connected Lynx Smart BMS.
The lynx system is a modular DC bus bar system used to connect batteries, DC equipment and provide fusing and battery monitoring. It consists of the following modules: Lynx Power In. Lynx Shunt. Lynx Distributor. You can use the Lynx Distributor or Lynx Power In with or without the Lynx Shunt.
Each Lynx distributor must be addressed and set to A, B, C or D. This is done via a 2-way dip switch inside the Lynx distributor. Refer to section 6.1.3. Addressing Lynx Distributor in the Lynx distributor manual. Use the VictronConnect App to give each fuse a custom name (maximum 16 characters).
Multi-model professional version. Unlocked for all* Land Rover models. *See coverage charts for full Lynx model coverage. The Windows based tool allows a simultaneous access to the vehicle diagnostics and consultation of circuit diagrams and other technical information.
The Lynx Smart BMS integrates seamlessly into our Lynx Distributor system and is available as a 500A (with M8 busbar) or 1000A (with M10 busbar) version. Page 1 Introduction
