Αποτελέσματα Αναζήτησης
The internal wiring diagram of the Lynx Distributor. 3.2. Fuse detection. The Lynx Distributor monitors each fuse and will detect a blown fuse. When a fuse blows, the red fuse LED will illuminate, the power LED will turn red and an alarm message is send to a connected Lynx Smart BMS.
The connector of the Lynx Smart BMS 500A has 11 pins, numbered from left to right starting with pin 1 and ending with pin 11, while the connector of the Lynx Smart BMS 1000A has 13 pins - two additional pins (pin 12 and 13) for future functionality.
The Lynx has 3 flex settings, with the Slic Pin locating the Pivot Strap at one of three locations. The furthest forward position (#1) will give you a more neutral flex, while the rear position (#3) will give you a slightly stiffer, more active flex. To move a Slic Pin, use a small tool or fingernail to press the wedge
View and Download Victron energy Lynx Distributor manual online. Lynx Distributor home automation pdf manual download. Also for: Lynx power in 1000.
Get tech info, including instructions, on 22 Designs telemark bindings. Read information on each binding, get mounting templates, and more.
A system schematic shows schematically how Victron Energy devices are connected to each other. Find schematics for your product.
The Lynx Smart BMS integrates seamlessly into our Lynx Distributor system and is available as a 500A (with M8 busbar) or 1000A (with M10 busbar) version. Page 1 Introduction
