Αποτελέσματα Αναζήτησης
The connector of the Lynx Smart BMS 500A has 11 pins, numbered from left to right starting with pin 1 and ending with pin 11, while the connector of the Lynx Smart BMS 1000A has 13 pins - two additional pins (pin 12 and 13) for future functionality.
The Lynx Smart BMS integrates seamlessly into our Lynx Distributor system and is available as a 500A (with M8 busbar) or 1000A (with M10 busbar) version. Page 1 Introduction
The internal wiring diagram of the Lynx Distributor. 3.2. Fuse detection. The Lynx Distributor monitors each fuse and will detect a blown fuse. When a fuse blows, the red fuse LED will illuminate, the power LED will turn red and an alarm message is send to a connected Lynx Smart BMS.
A system schematic shows schematically how Victron Energy devices are connected to each other. Find schematics for your product.
The internal wiring diagram of the Lynx Distributor. 3.2. Fuse detection. The Lynx Distributor monitors each fuse and will detect a blown fuse. When a fuse blows, the red fuse LED will illuminate, the power LED will turn red, and an alarm message is sent to a connected Lynx Smart BMS.
The lynx system is a modular DC bus bar system used to connect batteries, DC equipment and provide fusing and battery monitoring. It consists of the following modules:
The example below shows a Lynx system consisting out of a Lynx Power In, Lynx Shunt VE.Can and Lynx Distributor. Together they form a continuous busbar, with un-fused battery connections, battery monitor, main system fuse and fused load connections.
