Αποτελέσματα Αναζήτησης
The internal wiring diagram of the Lynx Distributor. 3.2. Fuse detection. The Lynx Distributor monitors each fuse and will detect a blown fuse. When a fuse blows, the red fuse LED will illuminate, the power LED will turn red and an alarm message is send to a connected Lynx Smart BMS.
Get tech info, including instructions, on 22 Designs telemark bindings. Read information on each binding, get mounting templates, and more.
The Lynx module can be opened up by unscrewing the 2 cover screws. The contacts on the left side are covered by a removable rubber sleeve. Red is the positive and black is the negative busbar.
The connector of the Lynx Smart BMS 500A has 11 pins, numbered from left to right starting with pin 1 and ending with pin 11, while the connector of the Lynx Smart BMS 1000A has 13 pins - two additional pins (pin 12 and 13) for future functionality.
If the Lynx Distributor is connected to a Lynx Smart BMS, it can be monitored and set up with the VictronConnect App. For more information, see the VictronConnect App download page and the VictronConnect manual.
2. Introduction. 2.1. The Lynx Power In. The Lynx Power In contains a positive and negative busbar with 4 connections for batteries, loads or chargers and a ground
A system schematic shows schematically how Victron Energy devices are connected to each other. Find schematics for your product.
