Αποτελέσματα Αναζήτησης
10 Φεβ 2003 · IDLE SYSTEM: (Idle - 1/8 throttle) The HSR idle system has two tunable components: the Pilot Air Screw and the Pilot Jet. The air screw’s purpose is to fine-tune the mixture at idle. The pilot jet controls the total amount of fuel passing through the idle system. The pilot jet can be exchanged for a richer or leaner one if needed (see the note
13 Μαρ 2022 · I picked my kit up here in Australia from someone that had purchased it for a Jensen Healey sports car. It came with new 2x HSR 45mm carbs, Adjoining throttle shaft, K&N air cleaners, choke cable adapter, Manifold adapters to bolt straight to the SU/Hitachi manifold and extra jets etc.
MIKUNI HSR42/45/48 JETS/NEEDLES/ACC PUMP NOZZLES. Genuine Mikuni! Don't settle for cheap replacements, get the part/kit that lasts! Fits all HSR series carbs. Rebuild kits available here! Made in Japan. Click here for a HSR tuning and initial set up manual. Float needle valve available here.
24 Ιαν 2006 · The jetting i`m looking for is: (Mikuni HSR45mm) Which ---> Pilot - Main - Needle - Pump nozzle & "E" clip position - Idle screw mixture turns from seated...???
30 Ιουν 2009 · I am setting up a msd programable single cylinder igntion and would like the jetting to be a little closer so it can run smoother. I am familar with tuning a FCR but not a Micky. I have tuned it on a dyno jet 250i and got a baseline.
6 Ιαν 2009 · Product Description. • Includes 165 through 185 main jets (2 each), 20 through 32.5 pilot jets (2 each), -95, -96 and -98 needles (1 each), 2 #60 a/p nozzles, 2 O-rings, 4 jet needle E-rings and all necessary washers.
The Mikuni HSR Easy Tool Kit includes all the important tools to perform basic jetting and maintenance on Mikuni's HSR 42, HSR 45 and HSR 48 car...