Αποτελέσματα Αναζήτησης
Mueller Co. offers the most complete line of time proven drilling and tapping machines available. Full Line Catalog Drilling & Tapping Machines Brochure. In 1871, Hieronymus Mueller, founder of Mueller Co., invented and patented the first machine for drilling, tapping and inserting corporation stops in mains under pressure.
- Tools
Drilling & Tapping Machines; Power Operators; Tools; Pipe...
- Drilling Machines (Small)
Mueller Co. manufactures several different small drilling...
- Tools
Retaining screw holds tool tightly in boring bar socket for precise alignment of tool and boring bar. Convenient knock-out pin allows easy tool removal. Ratchet Handle – fully enclosed ratchet; permanently lubricated; quick reverse button.
The compact and lightweight EZ-TAP™ drilling machine, designed specifically for water taps, is primarily used with service saddles and corporation stops up to 2” thanks to its 9-1/2” travel and 300 psi working pressure. It is now easier to make service connections on mains with or without pressure.
MUELLER Co. offers the most complete line of time proven drilling and tap- ping machines available. The MUELLER method of making a main to service connection using the MUELLER B-101 Drilling and Tapping Machine.
Performs 3/4" - 1" taps through corporation stops and service saddles on pressurized or dry mains; Compact, lightweight EZ-TAP drilling machine is designed specifically for water taps and primarily used with service saddles and corporation stop; Compact overall machine length is 25-1/2" is convenient for tight spots
Mueller ® A-3™ Drilling & Tapping Machine. Catalog number: 39210. Specifications: Hand or power operation; Designed for use on pressurized or dry mains; Insert or extract service stop tees 1" to 2" and pipe plugs to 2-1/2" in size; Use on cast iron and steel pipe; 90 psig (621 kPa) maximum working pressure without optional power clevis ...
With the tapping valve open, the shell cutter and boring bar are advanced to cut the main. 1 The tapping sleeve and valve are first attached to the main and tested. Then the drilling machine, with a shell cutter attached to the boring bar, is attached to the tapping valve using an adapter. The assembly should be pressure tested prior to making ...
