Αποτελέσματα Αναζήτησης
valves have a range of pressure and water flow that must be maintained in order to work properly. Now that you have an idea of the way the valves work you can see why sufficient pressure and flow are important.
TOPIx Workflow Overview – Maintenance, PDI and OSH, Fault and Breakdown. User Guide for Pre-Delivery Inspection (PDI) and Service. Interactive Electrical Wiring Diagrams (iEWD) - Components, Connectors, Wire Properties. Electrical Reference Library (ERL) - Connector, Location, Pinout, Wires.
The first step is to visually check the control valve and all its accessories. Check for any air leakage or physical damage. If found any issues then correct them. Check the air supply from the air filter regulator (AFR) to the valve positioner or solenoid valve whichever is applicable.
The ESP-LXME Controller includes diagnostic and status functions to help you troubleshoot and pinpoint the source of the problem. Refer to the ESP-LXME Controller Installation, Programming & Operation Guide (shipped with the controller or available on-line) for step-by-step instructions to use the diagnostic features.
pressure by opening a service valve, which will vent all pressure into the atmosphere: remove all electrical power. NOTE If the vehicle’s ECM/TCM are replaced or re-programmed, ensure the compressor programming is retained or reset in the vehicle’s ECM/TCM to Vanair ® specifications. For assistance, contact the Vanair Service Department. NOTE
Sprinkler Warehouse provides typical scenarios paired with possible causes and solutions. With easy to read charts, the problem can be fixed in no time. Valve Troubleshooting Chart 1. A Zone Valve Will Not Turn On. Incorrect watering days, start times or run times.
Information - Diagnosis and Testing (see TOPIx Workshop Manual, section 412-00). NOTE: the Direct Pressure Sensing (DPS) valve may also be referred to the Electronic Control Valve. Replace the A/C compressor Direct Pressure Sensing (DPS) valve replacement procedure.
