Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

  1. You can calculate the frequency by finding the reciprocal of the time period (T) of an oscillation: f = 1. The angular frequency (ω) is the angle an object moves through per unit time (has only magnitude). You can calculate angular frequency by finding the product of frequency and 2π: ω = 2πf ω = 2π. T As f = 1.

  2. (a) Calculate the frequency of the damped oscillation. (b) By what percentage does the amplitude of the oscillation decrease in each cycle? (c) Find the time interval that elapses while the energy of the system drops to 5.00% of its

  3. We can use the formulas presented in this module to determine both the frequency based on known oscillations and the oscillation based on a known frequency. Let’s try one example of each. A medical imaging device produces ultrasound by oscillating with a period of 0.400 µs.

  4. By rearranging the above formula so that its subject is frequency, you can derive the following formula for the time period of oscillations (T): T = 1 = 2π. f ω. Using the measurements described in the section above, you can use the following formulas with simple harmonic oscillators: = x Acos ωt. v = − A ωsin ωt. a = − A ω 2 cos ωt.

  5. • Correct answer for acceleration [14 m s–2] Example of calculation: ω = 2 π / T = 2 π /(60 s / 38) = 4.0 s –1. a. max = ω. 2. A = (4.0 s –1)2 × 0.90 m = 14 m s –2. 2 (iii) Show that car loses contact • Required a. max. is greater than g • So, at a position (of 0.61 m) above the equilibrium position, vehicle loses contact ...

  6. frequency of oscillation doubles. The mass was changed by a factor of (a) 1/4 (b) 1/2 (c) 2 (d) 4 Answer (a). Since the frequency has increased the mass must have decreased. frequency is inversely proportional to the square root of mass, so to double frequency the mass must change by a factor of 1/4. 3. A mass vibrates on the end of the spring.

  7. We can use the formulas presented in this module to determine both the frequency based on known oscillations and the oscillation based on a known frequency. Let’s try one example of each. (a) A medical imaging device produces ultrasound by oscillating with a period of 0.400 µs.