Αποτελέσματα Αναζήτησης
Hog Slat Feed Bins are designed for grains and/or free flowing materials. Using this equipment for any other purpose or in a way not within the operating recommendations specified in this Manual will void the Warranty and may cause injury or death. Identification of Hardware: No hardware substitutions are permitted unless noted. WARNING!
17 Νοε 2020 · PNEG-1460 6', 7' and 9' Bulk Feed Tank and Grain Hopper Tank Series 13 4. General Information Bulk Feed Tank Assembly Manual General Instructions First, read the assembly manual completely before starting to assemble your Bulk Feed Tank. Check the shipment with the packing list to be sure there are no shortages. 1.
Safe operation and use of the grain bin requires that you familiarize yourself with the various safety decals and the areas or particular functions that the decals apply to, as well as the safety precautions that must
Installation Instruction. for Model 108 F LEX-AUGER® Feed Delivery Systems. For additional parts and information, contact your nearest Chore-Time distributor or representative. Find your nearest distributor at: www.choretime.com/contacts.
8 Φεβ 2023 · Sukup grain bins are designed and manufactured to withstand the constant forces applied when filled with grain. When properly installed and operated, these structures will provide many years of service.
The new series of feed hopper bins are now available in 3 standard sizes of 6, 9 and 12 feet in diameter. Each of the 3 sizes are available in 1 - 4 rings and the 12’ bin is also available with 5 or 6 rings.
These upper ladder support brackets either bend in towards the center of the ladder or bend out away from the ladder depending on the diameter and roof angle of the tank being assembled. See Figure 8D below and Figure 8H on Page 34 that show brackets for the 6' 30°, 9' 30° and 9'-40° roofs.
