Αποτελέσματα Αναζήτησης
17 Μαΐ 2019 · I've been using CFE Pistol under Rocky Mountain Reloading 147 FMJ round nose. My usual load is 4.2 grains with a 1.13" OAL. Gets me averages of 930-950 FPS in my 4.25" Valkyrie. Shoots very close to standard pressure HST or Golden sabers from my experiments.
6 Ιουν 2023 · Until then, a lot of shooters are requesting load data for the 9mm Luger cartridge using our 147gr bullets, and I’m here to deliver the report I was given. The short and sweet of it, this is data for standard pressures as well as +P pressures, so know what you have and what you can work with safely.
22 Ιαν 2008 · I am loading for IDPA and want a powder that will give great accuracy while maintaining a relatively low power factor, around 130,000. Can anyone recommend a quality powder that is known to be accurate under this expectations.
9mm Luger / 9mm Parabellum (147 GR) Handload Data reloading data with 55 loads. Using bullets from Hornady HPBT-XTP, Speer TMJ-FN. Powders include Winchester, Vihtavuori, Alliant, IMR, Hodgdon, Accurate, Ramshot.
5 ημέρες πριν · That said, the load I use with my 1968 P210-6 is a 125gr flat nose polymer coated bullet, loaded with 3.8gr of N320 I have also loaded it with 4.5gr of N340 behind a 124gr JHP which should theoretically be more accurate at 50m but I couldn't tell the difference with my level of shooting.
26 Μαρ 2016 · I am struggling to figure out load data for 147gr Blue Bullets. Apparently there's not a lot of load data available for this setup. Which I didn't realize before I bought a bunch of bullets. I picked up HP-38, but from what I can tell, some think it's too fast a powder for the 147gr.
16 Ιαν 2014 · My load was 147gr MBC lead bullets with 3.3gr of Unique. I know that Unique is a bit slower burning than most of the popular 9mm powders. My manual recommends using the medium burn rate powders for 147gr bullets.
