Αποτελέσματα Αναζήτησης
4.0 PRE-INSTALLATION & HARNESS ROUTING GUIDELINES The installation of your wire harness kit consists mainly of two parts: The physical routing, positioning, and securing of the wire harness, wire groups, and individual wires The proper electrical connection of the individual circuits.
The Painless wire harness is designed to be used in vehicles with a General Motors - keyed steering column, or other steering columns, depending on the kit purchased. All wire is 600 volt, 125 c, TXL.
You have purchased what we at Painless Performance Products believe to be the most up-to-date and easiest-to-install automotive wire harness on the market. It is designed for easy installation, even if you have no electrical experience. All kits have a built-in-anti-theft feature.
INTRODUCTION You have purchased what we at Painless Performance believe to be the most up-to-date and easiest-to-install universal Jeep wire harness on the market. It is designed for easy installation, even if you have no electrical experience.
Connect this wire from the Starter Motor Battery terminal, as shown in Figure 7-2A.
You will find 2 wires grouped together for starter connections. These wires are: Black/Purple: 12 gauge wire, printed #919 STARTER SOLENOID "S"... Page 55 Wiring to the Solenoid Use the following instructions and diagrams if you are wiring directly to the starter solenoid. This applies to GM starters with the solenoid on the starter and remote ...
These instructions provide information for the installation of the 60217 & 60218 Vortec Fuel Injection Harness Kit. The contents of these instructions are divided into major Sections, as follows: 8. TROUBLE-SHOOTING INSTRUCTIONS. Sections are further divided into Paragraphs and Steps.
