Αποτελέσματα Αναζήτησης
19 Φεβ 2008 · I have a PF/2 Energizer, model 150-403 in an Eljer 141-700 (actually I have three of these). Two of them have developed a "whining" sound when flushed and one also has weakened flushing. Is there something a home handy-person can do to remedy this (I have the user guide and tools)?
PF/2 by Geberit 302AG Actuator Valve. This is what starts the flush. It is a spring loaded with a floppy metal pin on the end and the body has two O-Rings on it. This actuator been redesigned. Use RK150 if your Model 150 has a Serial Number lower than 132000
19 Μαΐ 2015 · It give a pressurized assist to the flush, meaning a more powerful flush with less water. I have seen these type toilets deliver an acceptable flush with 1 gallon of water.
Replacement Parts ONLY! Click on any Picture for information and prices. 22PSI REG. SPRING KIT. 35PSI REG. SPRING KIT.
When the PF/2 Energizer ® flushes, it produces a "flood tide" of water to carry bowl wastes on its crest down the drain line. No water is wasted at the start or finish of the flush. The PF/2 uses less than 1.6 (GPF) gallons or 6 (LPF) litters of water per flush while meeting the highest American, Canadian and Mexico National Standards.
The PF/2 Energizer system has been discontinued and parts are no longer available. Sloan Flushmate has created several kits that can be used to change your PF/2 equipped toilet to use a Flushmate tank.
PF/2 ---:;; by Geberit How the PF/2 Energized Flush System Works (Figure 2) The PF/2 system works by using inlet water pressure to compress the air inside the pressure tank. When the toilet is flushed, this air acts like a spring to propel the water around the rim and into the tank.
