Yahoo Αναζήτηση Διαδυκτίου

Αποτελέσματα Αναζήτησης

  1. Magnitude of the asymmetry (transient component) depends on the phase of the generator voltage at the time of the fault. In this class, we will use the steady-state current component, , as our primary fault current metric. The reactance of the generator was assumed constant in the previous example.

  2. This white paper will go inside the motor and provide a more detailed look into what happens when one phase of the power supply is lost and how Sprecher + Schuh overload relays handle the phase failure. Most of the motors that we encounter are delta-connected squirrel cage induction motors.

  3. 18 Νοε 2019 · Solidly Grounded Systems. Ground fault currents in solidly grounded systems can approach phase fault levels. Ground fault protection for these systems is usually provided by residual protection, either calculated by relay or by external CT residual connection to IN input.

  4. Examples of how utilities apply BFP in ways that minimize the impact of single points of failure within the protection system are provided. Different utility philosophies about how the BFP interacts with local and remote control, automatic reclosing, lockout, and restoration functions are discussed. II.

  5. This presentation reviews the established principles and the advanced aspects of the selection and application of protective relays in the overall protection system, multifunctional numerical devices application for power distribution and industrial systems, and addresses some key concerns in selecting, coordinating, setting and testing of smart...

  6. Typically, only 5% of the initial faults in a power system, are three phase faults with or without earth. Of the unbalanced faults, 80 % are line-earth and 15% are double line faults with or without earth and which can often deteriorate to 3 phase fault. Broken conductor faults account for the rest.

  7. Our equations cover both the fail-open and fail-short failure scenarios (fused, fuseless, and temporarily repaired banks). The paper also derives equations for calculating the degree of internal overvoltage that a failure puts on the healthy capacitor units in the bank. Next, we derive equations for the unbalance protection operating signals as

  1. Γίνεται επίσης αναζήτηση για