Αποτελέσματα Αναζήτησης
The standard Enigma faceplate mounts through the concealment wing of your holster. Therefore, your holster shell must have the correct type of wing and the correct mounting points to be compatible, plus a few extra considerations. It needs two mounting holes directly below the trigger guard, spaced exactly ⅝” apart from center to center.
The Light Bearing Enigma has two long, parallel slots in the faceplate, and attaches to the holster with four screws. Identify which model of Enigma you have, plus helpful info about how to wear it, adjust the leg leash, & install optional accessories.
3 Δεκ 2021 · If you’re not sure which adjustment holes to use, start with the top, middle holes (see pic below). Visit the Standard Enigma Instructions page for more information on how to adjust your Enigma for best concealment.
12 Απρ 2023 · Phlster Enigma compatible holsters must have two screw holes vertically ⅝” or 1.59 cm length apart to allow the holster shell to mount to the Phlster’s Tegris faceplate. These two holes should be on a flat area below the trigger guard of the holster.
30 Σεπ 2021 · The Phlster Enigma will work with your Kydex holster as long as your current holster has a wing attachment with the standard 5⁄8 ″ hole spacing. If your holster uses one of the following wings, the Enigma will work: Mod Wing. Dark Wind. RCS VG2. Phlster makes two varients of Enigma.
My current holster setup is a Tulster Oath with the Enigma. I’ve also used the PHLster Pro, TXC X1, JMCK WingClaw 2.5, and a Black Arch holster with the enigma. Current favorite is the Tulster Oath due to its low profile while still accommodating the red dot.
5 Μαΐ 2021 · A compatible holster shell will have two mounting holes directly under the trigger guard (pictured below). In addition to Phlster’s own shell, other makers such as Eclipse Holsters and JM Custom Kydex produce compatible models.
