Αποτελέσματα Αναζήτησης
2.1.4 Pilot ladders with more than five steps should have spreader steps not less than 1.8 m long provided at such intervals as will prevent the pilot ladder from twisting. The lowest spreader step should be the fifth step from the bottom of the ladder and the interval between any spreader step and the next should not exceed nine steps.
3 Ιουλ 2020 · Not every ladder that is rigged overboard is a pilot ladder. In ISO 799-1, the main manufacturing and material requirements for a pilot ladder can be found.
Is the pilot ladder rigged to the correct height for the Pilot boat? ☐ Check the physical length of the ladder. 3 spreader bars may indicate a climb greater than 9 metres. ☐ Is the pilot ladder in good condition? • Is there any visible wear and tear? • Check for broken steps or spreaders? • Are all steps and ropes clean? ☐
The steps of the pilot ladder should comply with the following requirements: if made of hardwood, they should be made in one piece and free of knots. if made of material other than hardwood, they should be of equivalent strength, stiffness and durability to the satisfaction of the administration (i.e. Flag State of ship)
2.1.2 The steps of the pilot ladders should comply with the following requirements: .1. if made of hardwood, they should be made in one piece, free of knots; .2. if made of material other than hardwood, they should be of equivalent strength, stiffness and durability to the satisfaction of the Administration;
2.1.4 Pilot ladders with more than five steps should have spreader steps not less than 1.8 m long provided at such intervals as will prevent the pilot ladder from twisting. The lowest spreader step should be the fifth step from the bottom of the ladder and the
Download PDF. The IMO Convention for Safety of Life at Sea (SOLAS Chapter V, Regulation 23) sets out the principal requirements for the rigging of pilot ladders. There is further detailed technical specification for pilot ladder in IMO Resolution A.1045 (27).
