Αποτελέσματα Αναζήτησης
When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could result.
This section describes the procedures for loading and replacing consumables such as paper and toner and countermeasures if the paper or original is jammed.
Illustration [9] Indication at the stacker control panel Clear a paper jam at B1 Step Action Illustration Open the top cover. Open B1 and remove the jammed paper. Chapter 5 - Troubleshooting Canon High Capacity Stacker-H1...
This section describes how to clear a paper jam which occurs in the Stack Bypass-B1. The location of the Stack Bypass-B1 is indicated in the following illustration. NOTE. When removing any jammed paper from the fixing transport unit while using the Stack Bypass Alignment Tray-C2 and Long Sheet Tray-B1, leave the Stack Bypass-B1 open and gently ...
Check the paper jam location on the screen, and follow the procedure below to remove the original. The positions of each unit and area, "B1 lever," "B2 guide," etc. in the procedure are as shown in the figure.
1. Hold sides of any jammed paper and gently pull it out. attention: Do not force a jammed paper out of the machine. If the jammed paper cannot be removed easily, proceed to the next step. 2. Close the stack bypass tray. 3. Open and close the front cover to reset the machine.
Clearing paper jams. Multi Purpose Tray. Remove all papers from the multi 1 purpose tray. If paper is jammed inside, pull the paper toward you to remove. Pull up left cover 1 lever and open the left cover 1. 3 Remove the jammed paper.
