Αποτελέσματα Αναζήτησης
29 Οκτ 2018 · SWiM stands for Single Wire Multiswitch, and it’s a proven technology from DIRECTV that was first rolled out to customers in 2007. The idea is to make installing and managing a DIRECTV system simpler and more like a cable television system.
23 Αυγ 2010 · You can connect the power inserter either between the dish and the splitter or between the splitter and a receiver. If you do the latter, you must connect the power inserter to the power passing leg of the splitter.
11 Οκτ 2021 · Check the SWIM cable connection and check all the needed pin connections on the SWIM connector. If the application code uses Swim Disable and Reset pin as Output or has disabled SWIM Clock Divider: Try Now to SWITCH OFF and ON the application Power Supply while NRST Reset pin is forced low.
18 Φεβ 2011 · Yes, you can move it to another room but you will first have to switch lines at the SWM splitter. There is one power passing port on the swm splitter and the power inserter must me going to that. Now, will that fix your problem?
Check the SWIM cable connection and check all the needed pin connections on the SWIM connector. If the application code uses Swim Disable and Reset pin as Output or has disabled SWIM Clock Divider: Try Now to SWITCH OFF and ON the application Power Supply while NRST Reset pin is forced low.
30 Αυγ 2020 · If you have a SWM splitter then the "To SWM " port on the power inserter is connected to the red power pass through port and if you have an HR54 Genie or HS17 Genie2 then the coax from those has to be connected to that red port also. It doesn't matter which room coax is connected to the other ports.
View and Download DirecTV SWiM installation diagrams online. SWiM switch pdf manual download.
