Αποτελέσματα Αναζήτησης
DRAIN the cooling system to remove loose rust and sediment from the radiator. Follow owner’s manual (ILLUS. 1a). FLUSH the system using a quality product like Prestone ® Flush and Cleaner to clean the engine block (ILLUS. 2a).
- Prestone Dex-Cool Antifreeze + Coolant
Protects vital engine parts for up to 5 years/150,000 miles...
- Prestone Dex-Cool Antifreeze + Coolant
6 Οκτ 2020 · To flush with water and remove any leftover residue from the old coolant/antifreeze, top up the radiator with clean water using a hose, and replace the radiator cap. Then, start the engine and leave it running for 15 minutes.
Instructions Pour entire contents of Prestone® Super Radiator Flush into radiator and fill with water. There used to be a kit you could buy to do this type of flush, you would cut one of the hoses leading to the heater core and install a hose.
Prestone Cooling System Flush delivers a deep clean for your car’s cooling system, helping to remove harmful deposits and corrosion. It’s designed to be used to flush the radiator, powering through dirt, rust, and grime to extend the life of internal parts within the cooling system.
Drain the old coolant/antifreeze from the cooling system. If you’re not sure how, read our comprehensive guide on how to do a coolant flush. Replace the radiator drain valve and add Cooling System Flush to the coolant reservoir. Don’t replace the cap. Start the car and let the engine run for 5-10 minutes.
The Prestone ® Flush ‘N Fill Kit helps you replace your car’s antifreeze/coolant and defy breakdowns. Buy Now. LEARN HOW TO USE THIS PRODUCT. Professionally backflushes cooling systems of most cars and light trucks. Easily installs in minutes. Similar Products. Prestone ® All Vehicles. Antifreeze + Coolant. Prestone ® Platinum All Vehicles.
21 Δεκ 2017 · Tighten the radiator petcock drain and pour one gallon of Prestone® HD 2in1 Flush and Degreaser into the radiator or reservoir bottle and fill the rest of the system with water. Run the truck with the heater on high heat for 30 to 45 minutes after engine operating temperatures have been reached.
